|
|
Flushometers - Optima Exposed Urinal Flushometers
|
|
Optima Exposed Urinal Flushometers |
|
Quiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer for either left or right hand supply with the following features:
- PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
- OPTIMA® EL-1500 Self-Adaptive Infrared Sensor with Indicator Light
- Chrome Plated Wall Cover Plate (for 2-gang Electrical Box) with Vandal Resistant Screws
- Screwdriver Bak-Chek® Angle Stop
- Free Spinning Vandal Resistant Stop Cap
- Adjustable Tailpiece
- High Back Pressure Vacuum Breaker Flush Connection with One-Piece Bottom Hex Coupling Nut, Spud Coupling and Flange
- Sweat Solder Adapter with Cover Tube and Cast Wall Flange with Set Screw
- High Copper, Low Zinc Brass Castings for Dezincification Resistance
- Non-Hold-Open Integral Solenoid Operator, Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation
- Flush Accuracy Controlled by CID™ Technology
- Diaphragm, Stop Seat and Vacuum Breaker molded from PERMEX™ Rubber Compound for Chloramine Resistance
- 100% of the energy used in manufacturing is offset with Renewable Energy Sources – Wind Energy
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037, ANSI/ASME A112.19.2, and Military Specification V-29193. Installation conforms to ADA requirements. |
|
Optima® Flushometers operate automatically and ensure access and ease of use by the disabled. By eliminating the need for manual operation, the spread of disease is greatly reduced and they are less susceptible to the abuses of user operation.
|
| Product Documentation |
|
 |
Specification Sheet |
|
|
Exposed, Sensor Operated Royal® Model Urinal Flushometer, for 1¼” top spud urinals. - Top Spud 1-1/4 inch |
English |
rev:1b|187.30 KBytes | 6/12/2008 |
|
|
Exposed, Sensor Operated Royal® Model Urinal Flushometer, for ¾” top spud urinals. - Top Spud 3/4 inch |
English |
rev:1b|185.55 KBytes | 6/12/2008 |
|
|
Exposed, Sensor Operated Regal® Model Urinal Flushometer, for 1¼” top spud urinals. - Top Spud 1-1/4 inch |
English |
rev:1b|170.45 KBytes | 6/11/2008 |
|
|
Exposed, Sensor Operated Regal® Model Urinal Flushometer, for ¾” top spud urinals. - Top Spud 3/4 inch |
English |
rev:1b|184.84 KBytes | 6/11/2008 |
|
|
|
 |
Installation Instruction |
|
|
Installation instructions for Optima Systems sensor operated Royal flushometer concealed and exposed urinal installations. - |
English |
rev:3|539.49 KBytes | 7/2/2008 |
|
|
Electrical box rough-in template for sensor operated exposed urinal flushometers. - |
|
rev:0a|98.08 KBytes | 7/2/2008 |
|
|
Installation instructions for Optima sensor replacement kits. - |
|
rev:1|37.96 KBytes | 7/2/2008 |
|
|
Installation instructions for Optima® ES-S Flushometer electrical box positioning and support kit for exposed closet and urinal installations - Top Spud |
|
rev:0|217.85 KBytes | 7/9/2008 |
|
|
|
 |
Maintenance Guide |
|
|
Maintenance Guide for Optima Sensor Operated Water Closet and Urinal Flushometers. - Top Spud and Back Spud 3/4 inch 1-1/4 inch 1-1/2 inch |
English |
rev:0b|545.76 KBytes | 7/14/2008 |
|
|
|
|
|
|
|
|
|
|